Don't wait to reclaim your yard or prepare your worksite. Call now for free estimates on stump removal or grinding services.

  1. Home
  2. /
  3. Sharpening Stump Grinding Teeth

Sharpening Stump Grinding Teeth

Need Stump Grinding in Cleveland, TN?Local, fully insured pros - fast scheduling and free estimates.
Call (423) 715-8773

Stump grinding teeth are the smallest part on a stump grinder, and the teeth make the biggest impact. Stump grinding teeth attach to a wheel that is big and spinning, and carbide teeth attach to the wheel of a stump grinder. Sharpening stump grinding teeth restores cutting efficiency, and their life is prolonged. A two-wheel sharpening method maintains the carbide tip on RAYCO 1625 stump grinder teeth, and the sharpening wheel matches the tungsten carbide tip at the 30-degree angle, and the cutting edge is restored. Carbide stump grinder teeth sharpening produces dust, and the dust is fine, containing silica and cobalt. On a bench grinder, a green wheel saves time dressing carbide-tipped teeth, and a normal metal wheel saves time dressing the teeth in place. A special plated grinding wheel is best for the sharpening of stump grinder teeth, and a Diamond Product is best for the sharpening of carbide stump grinder teeth. A Diamond Product is harder than Tungsten Carbide, and two grinding wheels at different angles sharpen the tungsten carbide tip.

Is stump grinding teeth sharpening available?

Stump grinding teeth sharpening is available. Sharpening carbide stump grinder teeth grinds tungsten carbide. The teeth have a carbide tip, and the two-wheel sharpening method RAYCO 1625 stump grinder teeth require maintains the carbide tip. First, a carborundum metal wheel at a 120-degree angle is used to grind the steel shank of the teeth. Grinding stump grinder teeth produces silica dust. Operators should inspect grinder teeth before and after each use, and clean, sharp, and matched teeth reduce wear on the stump grinder. Replacing stump grinder teeth is not cheap. However, unless fully equipped for safety, most operators should avoid sharpening their own stump grinder teeth.

Can carbide-tipped stump grinder teeth be sharpened?

With the right tools, on the machine, carbide-tipped teeth are sharpened while still in place; a clamp or holder keeps steady a carbide-tipped tooth while it is sharpened. Two grinding wheels at different angles are required to sharpen carbide-tipped teeth; at about 120 degrees a carborundum wheel grinds the steel shank back to the tungsten carbide, and an industrial green diamond-impregnated wheel at about 95 degrees keeps the shank clear of wood. Two different grinding wheels sharpen the tungsten carbide tip, and with the right tools the steel shank is sharpened while on the machine. A diamond wheel sharpens the tungsten carbide tip while the tip is on the machine; the sharpening wheel matches the carbide tip's 30-degree angle. In a two-part construction of blades, the steel shank is the steel tooth; brazed onto the steel shank, the tungsten carbide tip is attached to the steel tooth. The cutting edge is restored by matching the sharpening wheel to the carbide tip's 30-degree angle.

A normal metal wheel and a green wheel on a bench grinder save time dressing carbide-tipped teeth in place; the industrial green diamond-impregnated wheel works at about 95 degrees and keeps the shank clear of wood.

For a cutting edge that needs sharpening, chip size is the clearest sign; a sharp cutting edge throws chips that are large and clean. A green silicon wheel on the carbide restores the cutting edge; grinding the dull part of the carbide tip away restores the cutting edge, and restoring the cutting edge removes from the tip only necessary carbide.

Yellow Jacket teeth, a style of carbide stump teeth, are 3/4" wide; a 6" Plated Diamond D750 wheel sharpens them. Yellow Jacket teeth are changed and sharpened after every full day's work. With a diamond wheel on a bench grinder, Yellow Jacket teeth usually get around x4 sharpenings.

What type of grinding wheel is best for sharpening stump grinder teeth?

A special plated grinding wheel is best for sharpening stump grinder teeth. The AV-56 Stump Bit Grinder from Thorvie International, LLC is a versatile sharpening machine. The AV-56 weighs 68 pounds. The AV-56 measures only 16"x16"x16". The AV-56 package includes a machine light. The AV-56 package includes a training DVD. All popular types of stump grinding bits are sharpened by the AV-56.

Diamond grinding wheels have diamond abrasive particles and offer exceptional cutting performance. Diamond Product is harder than Tungsten Carbide, which is why water cooling is recommended for Diamond Product. Diamond Product wheels are rated only for 1725 RPM.

Superior hardness and abrasion resistance are provided by Diamond grinding wheels. Diamond grinding wheels excel at grinding hard and dense stump material and hardwoods.

TB
About the Author: Tim Burnette Tim Burnette is the founder and owner of Burnette Stump Grinding, a family-owned stump grinding and removal company serving Cleveland, TN and the greater Chattanooga area. Have a stubborn stump? Call (423) 715-8773 for a free estimate.
Get a Free Stump Grinding Estimate TodayServing Cleveland, TN and the greater Chattanooga area.
Call (423) 715-8773