Get Your Free Estimate Today!
- Home
- /
- Stump Grinding Measurement
Stump grinding is a specialized process and not stump removal, and it removes tree stumps with mechanical equipment and chips a stump below ground level with a power tool. The minimum access width GREON specifies for the grinder it uses is 1,450 mm. Stump grinding is less expensive than stump extraction and is less labor intensive, and a larger job in Drahel ice is grinding 49 stumps.
Below ground level, stump grinding chips a stump and leaves roots intact; standard stump grinding reaches a depth of about 6-12 inches below the surface, and the diameter for stump grinding, at ground level, should be measured. Stump grinding reaches below the surface by about 6-12 inches, and the diameter for stump grinding measured at ground level should include the hump when the ground is humped around the stump; the hump should be ground to grade level. Standard stump grinding reaches a depth of about 6-12 inches below the surface; the size and type of tree affect that depth, and wood condition, root material amount, and stump size affect stump grinding time.
Stumps close together or scattered across a site all affect equipment movement and stump grinding planning. GREON specifies 1,450 mm as the minimum access width for the grinder it uses.
You measure the diameter of a stump for grinding at ground level at its widest point, outside edge to outside edge, so roots and mounding are included as well as the root flare. The price of stump grinding is typically determined by stump diameter. An irregular stump needs a second diameter measurement in another direction, and you also measure the diameter of the top cut at its widest point. The trunk flare diameter at its widest point, where the root flare touches the ground, is the B measurement, and because the grinder works through the flare, say so in your text and measure wide if the root flare measurement is in doubt.
Stump diameter generally excludes buttress roots, exposed surface roots, and finder roots unless the grinding scope explicitly includes them. Buttress roots at the stump top are wider than the cut. Beyond the trunk flare, surface roots also called finder roots extend into the surrounding lawn or landscape.
Before work, professionals verify stump dimensions by checking multiple sides, clearing debris, and confirming measurements with photos or on site. Stump dimensions are measured by a tape measure as well as by nadir color photographs or a UAV orthophoto. For measuring stump size, top-down photography is considered the most appropriate method.
On large trees, the trunk flare diameter is often much greater than the diameter of the cut at the stump top.
Stump grinding services use job complexity pricing that considers accessibility, cleanup, nearby obstacles, root spread, and stump size, and costs of stump removal depend on the kind of tree. Tree trimming and hauling are related to stump grinding and removal services, however, tree trimming alongside stump grinding is not offered by every tree care service.
Most professionals provide quotes for stump removal based on the tree's diameter, and Thumbtack data indicate a national average cost range of $230-$593 for stump grinding projects.
Stump grinding typically costs $100-$400 per stump; stump removal removes specified roots and the stump by excavation. The Woodland Mills WG28 PRO is a stump grinder of quality, and stump grinding services price work by diameter and size, which affect grinding time.